This code is developed in order to strengthen the construction engineering quality management， unify acceptance of concrete structure engineering construction quality and guarantee project construction quality.
This code is applicable to construction quality acceptance of concrete structure.
Quality acceptance of concrete structure shall not only comply with those specified in this code， but also comply with those in the current national relevant standards.

1 General Provisions
2 Terms
3 Basic Requirements
4 Formwork Item Project
4.1 General Requirements
4.2 Formwork Installation
5 Reinforcement Item Project
5.1 General Requirements
5.2 Rebar
5.3 Rebar Fabrication
5.4 Rebar Connection
5.5 Rebar Installation
6 Prestressed Item Project
6.1 General Requirements
6.2 Materials
6.3 Fabrication and Installation
6.4 Tensioning and Detensioning
6.5 Grouting and Anchorage Sealing
7 Concrete Item Project
7.1 General Requirements
7.2 Raw Materials
7.3 Concrete Mixtures
7.4 Concrete Construction
8 Cast-in-situ Structure Item Project
8.1 General Requirements
8.2 Appearance Quality
8.3 Positional and Dimensional Deviation
9 Precast Structure Item Project
9.1 General Requirements
9.2 Precast Members
9.3 Installation and Connection
10 Concrete Structure Sub-part Project
10.1 Entitative Inspection of Structure
10.2 Acceptance of Concrete Structure Sub-part Project
Appendix A Records on Quality Acceptance
Appendix B Inspection on Structural Performance of Flexural Precast Members
B.1 Inspection Requirements
B.2 Inspection Method
Appendix C Strength Inspection of Specimen Cured at the Same Condition of Concrete Structure Entity
Appendix D Inspection on Concrete Strength of Structure Entity with Rebound-core Drilling Method
Appendix E Inspection on Rebar Cover Thickness of Structure Entity
Appendix F Inspection on Positional and Dimensional Deviation of Structure Entity
Explanation of Wording in This Code
List of Quoted Standards