机织面料是服装、家居和工业用面料中极为重要的部分。多年来，机织物成型加工的技术在不断发展，但经纱和纬纱准备及织造一块面料的基本原理总体保持不变。本书是纺织工程专业本科教学的平台课程教材之一。它由前言、经纱准备、纬纱准备和织造四个部分组成。经纱准备和纬纱准备部分分别介绍络筒、整经、浆纱、穿经、卷纬、纬纱热定型的加工原理、设备和特征；织造部分详细介绍机织物在织机上成型必需的开口、引纬、打纬、卷取和送经即五大运动的原理和特征。此外，本书还阐述了机织物成型加工技术的发展趋势。本书的特色是在阐述机织物加工设备和原理的同时，结合了大量的示意图，以帮助读者有效、准确地理解机织物成型加工的专业知识内容。本书具有较强的理论性、知识性、实用性和前沿性。
本书可作为高等纺织院校纺织专业教材，也可作为纺织工程技术人员和相关领域研究人员的参考用书。

庄勤亮，Professor ZHUANG has long been engaged in teaching and scientific research in textile science and engineering at the College of Textiles in Donghua University, specializing in the structure, formation and performance of various woven fabrics. She graduated from Donghua University with B.Sc. in Textile Engineering, and gained her M.Sc. and Ph.D. from the University of Leeds in the United Kingdom. She has been teaching the course of "Woven Fabric Structures" at the College of Textiles in Donghua University for more than twenty years, offering bilingual courses and full English courses for both undergraduate and graduate students (including international students). And the course of "Woven Fabric Structures" that she teaches was awarded the title of demonstration course by the Shanghai Municipal Education Commission. At the same time, in the field of research on the relationship between woven fabric structures and their performances, the author has had dozens of research papers published and the related invention patents granted. This book is one of the works written after the author's long-term related teaching and scientific research work.

PART I Introduction to Woven Fabric Formation
Chapter 1 Introduction
1.1 General characteristics of woven fabrics
1.2 Weaving on loom
1.3 Fabrication of woven fabrics
1.3.1 Warp preparation
1.3.2 Weft preparation
1.3.3 Weaving
PART II Warp Preparation for Weaving
Chapter 2 Winding
2.1 Purpose of winding process
2.2 Automatic winding process
2.3 Formation of yarn packages
2.3.1 Yarn unwinding from a bobbin
2.3.2 Types of winding systems for yarn packages
2.3.3 Characteristics of package formation in winding
2.4 Analysis of yarn tension in winding process
2.4.1 Characteristics of variation of yarn tension throughout yarn unwinding from a bobbin
2.4.2 Measures to make yarn tension uniform during unwinding
2.4.3 Yarn tension devices
2.5 Yarn clearing
2.5.1 Mechanical yarn clearers
2.5.2 Electronic yarn clearers
2.5.3 Comparison between mechanical clearer and electronic clearer
2.6 Yarn splicing
2.6.1 Pneumatic splicing
2.6.2 Mechanical splicing
2.6.3 Electrostatic splicing
2.7 Electronic device for self-stop winding according to predetermined length in yarn package
2.8 Yield and quality control of yarn winding
Chapter 3 Warping
3.1 Introduction
3.2 Warping systems
3.2.1 Types of warping
3.2.2 Warping process
3.3 Creel
3.3.1 Types of creel
3.3.2 Yarn tension device
3.3.3 Stop motion system
3.4 Warp tension control in warping
3.5 Winding of warp yarn sheet onto warp beams
3.5.1 Winding in direct warping
3.5.2 Winding in indirection warping
Chapter 4 Sizing and slashing
4.1 Introduction
4.1.1 Reasons of warp yarn slashing
4.1.2 Purposes of warp yarn slashing
4.1.3 Technical requirements of warp yarn slashing
4.1.4 Sizing and slashing equipment
4.1.5 Main performance indicators of warp slashing
4.2 Chemical size materials
4.2.1 Adhesive agents
4.2.2 Additives for sizing
4.3 Formulation of size mixture
4.3.1 Determination of size ingredients
4.3.2 Determination of proportion of each size
4.4 Sizing
4.4.1 Cooking of size mixture
4.4.2 Delivery of size solution
4.5 Slashing
4.5.1 Introduction
4.5.2 Warp beam creel
4.5.3 Size box
4.5.4 Separating sized yarns before drying
4.5.5 Drying of sized yarns
4.5.6 Waxing and splitting of sized yarns
4.5.7 Winding at headstock
4.5.8 Main control parameters
4.6 Novel slashing technologies
4.6.1 Pre-wetting technology
4.6.2 Optimization of configuration in size box
Chapter 5 Drawing-in and tying-in
5.1 Introduction
5.2 Main elements in drawing-in process
5.2.1 Drop wires
5.2.2 Harness and heddles
5.2.3 Reed
5.3 Ways of drawing-in and tying-in
5.3.1 Semi-automatic and automatic drawing-in
5.3.2 Tying-in
PART III Weft Preparation for Weaving
Chapter 6 Conditioning for weft yarns
6.1 Purposes of conditioning for weft yarns
6.2 Methods of conditioning
6.2.1 Natural conditioning
6.2.2 Conditioning by heating
6.2.3 Conditioning by wetting
6.2.4 Conditioning by combination of heating and wetting
Chapter 7 Quill winding
PART IV Weaving
Chapter 8 Shedding motion
8.1 Shedding mechanisms
8.1.1 Cam shedding mechanisms
8.1.2 Dobby shedding mechanisms
8.1.3 Jacquard shedding
8.2 Features of shed on weaving machine
8.2.1 Geometric shape of shed
8.2.2 Different types of shed
8.2.3 Clearness of shed
8.2.4 Tensile strain of warp yarns during weaving
8.3 Characteristics of harness movement
Chapter 9 Weft insertion motion
9.1 Intro