涂善东主编的《从失效到更好的设计制造和建造(英文版)》围绕从失效到更好的设计制造的主题，就当前结构完整性研究的相关科学问题及工程技术展开了广泛的学术研讨与交流。主要议题包括：工程材料的失效模式和建模、多尺度失效模拟、复杂加载历史和环境下的失效、复杂应力状态下的结构失效或岩土结构失效、工业装备的维修和可靠性、安全分析和风险评价、工程结构的失效案例研究等，议题涵盖石油化工、火力发电、核电工业、航空航天、交通运输、海洋工程、地下开采等。

Preface

Anomalies of monoscale notion of failure in contrast to multiscale character of failure for physical processes

 G. C. Sih

Revisions to the R5 and R6 structural integrity assessment procedures

 R. A. Ainsworth

A stochastic and local theory of fatigue for aging pressure vessels and piping

 Jeffrey T. Fong, N. Alan Heckert, James J. Filliben

Predicting crack initiation and propagation in pressurized aircraft structures

 Bob Farahmand, Frank Abdi, Kamran Nikbin

Quantitative damage assessment using guided ultrasonic waves signals

 Lin Ye, Zhongqing Su, Ye Lu

Comparison of ductile failure predictions with experimental data of multiple cracked plates and pipes

 Nak-Hyun Kim, Jong-Hyun Kim, Jun-Young Jeon, Han-Sang Lee, Yun-Jae Kim, Kunio Hasegawa,

 Katsumasa Miyazaki

From structure integrity to system integrity resilience

 W. J. Zhang

Structural integrity assessment of welds using neutron diffraction method

 Wanchuck Woo

A structural integrity assessment of an elbow subjected to internal pressure, system moments and operating

at high temperature

 Jinhua Shi

Aging management of nuclear power plants in Korea

 Tae-Eun Jin

Local fracture properties and dissimilar weld integrity in nuclear power systems

 Guozhen Wang, Haitao Wang, Fu-Zhen Xuan, Shan-Tung Tu

Neutron diffraction and numerical simulation to study the cutting induced relaxation of weld residual stress

 Wenchun Jiang, Wanchuck Woo

Finite element analysis of HAZ effects on limit loads for mismatched welded joints

 Kun Ling, Zhengdong Wang, Fu-Zhen Xuan

Mismatch effect on safety assessment of pressure pipe with incomplete penetration defect

 Zhijiang Jin, Chenghang Jiang, Zhengping Jiang, Huailei Yan

Research on root morphology regularization method of incomplete penetration defect in pressure pipe

 Zhijiang Jin, Chenghang Jiang, Zhengping Jiang, Huailei Yan

Modified h factor of center cracked panel specimen based on three-dimensional finite element simulation

 Hui Liu, Changyu Zhou, Qiao Dai

Numerical investigation on the influence of cathode flow channel depth on PEM fuel cell performance

 Jing Zhou, Jinzhu Tan, Xiaowei Zhang, Xuejia Hu, Guo Li, Liufei Fan

Modeling and numerical analysis of the shape memory alloy strip

 Pengtao Zhao, Jinhao Qiu, Huichen Yu

Finite element analysis of sealing chambers in a single-screw pump

 Long Pan, Tianpeng Xi, Jinzhu Tan, Ruilin Chen, Jun Hao

Application of three parameters interval finite element method to uncertainty analysis of spherical tank

 Chao Li, Changhong Liu, Xinchuan Qin, Yongtai Li

Fatigue-fracture mechanism under larger stress and strain conditions

 Jianhua Xiao

Correlation between pore structure and compression behavior of porous sintered Cu-Ni-Cr alloy at elevated

temperatures

 Wei Li, Jian Chen, Zhuo He, Yanjie Ren, Wei Qiu, Jianjun He, Jianlin Chen

The feasibility of research for shell deformations with isogeometric analysis

 Feng Chang, Weiqiang Wang, Rongjuan Sui, Pengfei Wang

Low cycle fatigue life prediction of GH909 superalloy at elevated temperature

 Shichao Zhang, Huichen Yu, Ying Li, Yuxin Zhao

Effect of pitch difference on the fatigue strength of bolt and nut based on the modeling considering fitting

clearance

 Yoshikazu Sano, Xin Chen, Yu-lchiro Akaishi, Yasushi Takase, Nao-aki Noda

Investigation on fatigue property of the A6N01 high strength aluminum alloy

 Bo Ding, Shanglei Yang, Qinglin Lin, Xu Chao

Electrochemical behavior of passive film on 304 stainless steel and chromaticity inspection method of film

quality

 Congqian Cheng, Tieshan Cao, Qinqin Fu, Dewei Deng, Jie Zhao, Guanyu Song

Simulation of the elasto-plastic response and residual stresses near metal surface due to laser shock processing

 Yao Fu, Xiancheng Zhang, Fu-Zhen Xuan, Zhengdong Wang, Shan-Tung Tu

Microstructural characteristics of the oxides formed on zinc contaminating stainless steel in high temperature

water

 Yan Zhao, Congqian Cheng, Zhiyuan Cao, Jie Zhao

Research on the properties of 20G steel with strain aging embrittlement using indentation test

 Jie Tang, Weiqiang Wang, Mengli Li, Pengfei Wang, Chenggong Su

Determination of reference temperature To for A508-III forging using PCVN specimens based on Beremin

toughness scaling model

 Yupeng Cao, Hu Hui, Fu-Zhen Xuan, Yinbiao He, Hui Li

Residual stress prediction for hot strip composite roll by measuring the stress of the disk cut out from the roll

 Xu Wang, Nao-aki Noda, Yoshikazu Sano, Wen-hai Guan, Yasushi Takase

Structural analysis on reinforcement for thick wall nozzle of pressure vessels

 Minshan Liu, Le Jiao, Tong Liu

Safety analysis for nozzles of coldstreched austenitic stainless steel pressure vessels

 Yunfei Zhang, Hu Hui, Peining Li

A study on welding technology and post-weld heat treatment of SA543 steel

 Huaquan Bo, Xuedong Chen, Wanbo Dou, Xuemei Luo

Failure analysis of the pure zirconium hanging sample for acetic anhydride reactor

 Pengfei Wang, Weiqiang Wang, Jie Tang, Feng Chang, Xiandong Shang

Research on interval failure assessment diagram of industrially pure titanium TA2

 Xiangwei Chen, Xiaohua He, Qiao Dai, Changyu Zhou

Atomistic simulation on crack growth in ct-Fe under high temperature

 Tong Liu, Minshan Liu

Calculation of toughness fracture and its scatter with the ASME reference curve

 Changjun Liu, Kaihua Jiang, Lijun Zheng, Peining Li

Path prediction of I+II mixed mode fatigue crack growth in pressure vessels made from 16MnDR

 Huifang Li, Xiaoju Sun, Caifu Qian

Feature of magnetic memory signals of crack and incomplete penetration in welding joints

 Pengiu Guo, Haijiang Zhao, Weihe Guan, Xuedong Chen

Study on the susceptibility of welding cold cracking in SA543 steel

  Xuemei Luo, Xuedong Chen, Wanbo Dou, Huaquan Bo

Hyper singular integral equation method for a circular crack in the brazed joint with a circular interface

  Chunwei Ma, Ding Ma, Peiquan Xu

Fracture toughness requirements of steam generator channel head and disposition methods of

nonconformance case

  Hao Qian, Kefeng Zhang, Yizhou Zhu, Xingyun Liang, Yinbiao He, Weida Yao

The stress distribution and critical crack length analysis of a cracked multilayer urea reactor

  Huadong Liu, Weiqiang Wang, Aiju Li, Yan Liu, Shugen Xu, Mengli Li, Ming Zhang

Pressure variation of BLEVE triggered by liquid release through a crack in cylindrical pressure vessel

 Shugen Xu, Weiqiang Wang

Creep life assessment on two kinds of low-alloy steel based on the omega method

 Haisheng Sun, Tong Xu, Xiangsai Feng, Kaishu Guan

Using a unified model of stress relaxation to predict creep behavior

 Jinquan Guo, Wuzhou Meng, Long Tian, Huichao Shi, Bo Liang

Effect of thermal and mechanical factor on type IV creep cracking of P92 steel

 Xiaojun Hao, Xiaoguang Niu, Zhen Dai, Shangqian Jing, Changfu Liu, Guozhen Dong

Effect of creep degradation on the magnetic domain and magnetic properties of 10CrMo910 steel

 Su-Zhou Zhang, Shan-Tung Tu

Effect of pit defect size on creep life of pressure pipe at high temperature

 Renliang Jin, Changyu Zhou, Jilin Xue, Zhifeng Yang

Assessment of C-integral for functionally graded materials

 Huan-Sheng Lai, Kee Bong Yoon, Shan-Tung Tu

Evaluation of creep properties by three-point bending tests with small specimens

 Fa-Kun Zhuang, Guo-Yan Zhou, Qiongqi Wang, Shan-Tung Tu

On damage mechanism and life prediction ofthermo-mechanical fatigue of Nickel based superalloy K417

 F. Liu, Z. G. Wang, S. H. Ai, S. W. Nam

Elasto-plastic dynamic time response and damage evaluation of a part cable-stayed bridge under severe

earthquake

 Xuesong Tang, Xingye Chen, Fan Geng

Damage factors and modeling for plastic film subjected to rolling contact fatigue used for full-open type

greenhouse

 Wanzhong Jiao, Yigen Zuo, Qifeng Luo, Nao-aki Noda, Yoshikazu Sano

Hydrogen induced ductility loss of hydrogen-charged and hydrogen-releasing 304L austenitic stainless steel

 Yanfei Wang, Jianming Gong, Yong Jiang, Wenchun Jiang, Wang Jiang

Study on intergranular corrosion of 316L stainless steel diffusion bonded joint

 Shuxin Li, Shurong Yu, Yanni He, Pengyi Zhang

Significance analysis on influential factors of stress corrosion based on grey relational theory for stainless steels

 Rongjuan Sui, Weiqiang Wang, Yan Liu, Yanpeng Qu, Songyong Chen

Feasibility analysis of the magnetic memory technology in the detection of hydrogen damage

 Junfei Wu, Hao Zhang, Mei Lin, Xuping Zhang

The damage test ofQ235 steel under the affect of stress and corrosion media

 Hao Zhang, Junfei Wu, Huaixiang Cao, Xuping Zhang

The effects of flowing solution on the corrosion of stainless steel

 Tieshan Cao, Congqian Cheng, Jie Zhao

Pitting corrosion behavior of Q235B in various stress levels and salt spray environments

 Huaixiang Cao, Xingqi Qiu, Mingda Song, Hao Zhang

Numerical analysis ofultirnate load for a marine riser containing corrosion defects

 Rui Liang, Tao Zhou, Xin Cao, Fang Zhao

Investigation on corrosion under insulation (CUI) of 304 stainless steel welded joints

 Xiaomin Bai, Jianqun Tang, Jianming Gong, Yingjie Jiang

Pin-on-disc wear test and simulation of HA/ZrO2 composite coating

 Lei Wu, Yumei Bao, Dongming Zhang, Guozhong Chai

Damage identification of pipeline structure based on curvature modal difference and genetic algorithm

 Zhanfeng Hao, Shaoping Zhou, Aiqiang Cui, Quan Yuan

Inner surface defect inspection for thick wall pipe of austenitic stainless steel based on ultrasonic TOFD

 Zhen Dai, Wei Li, Xiaojun Hao, Xiaoguang Niu, Shangqian Jing, Jifeng Zhao

On-line monitoring method for centrifugal compressor and impeller remanufacturing

 Ming Zhang, Weiqiang Wang, Yan Liu

Heat transfer model of underground heat exchanger in the aquifer

 Wenling Liu, Yan Chen

Author index

Keywords index